The sun visor of Retractable Car Covers Suppliers the car plays an important role in the driving process of the vehicle. It can not only provide the driver with a clear line of sight in time, but also effectively improve the safety of driving. How to disassemble the sunshade? Next, we will introduce the specific disassembly method to you.

1. First of all, we need to prepare the tools needed to disassemble the sun visor of the car, a flat screwdriver, a t-20 spline, and then open the door to prepare for the next disassembly process.

2. Fold down the sun visor by hand, first disassemble the right side stuck in the hook, take out a flat-blade screwdriver, use a flat-blade screwdriver to gently pry up the edge of the sun visor stuck in the hook, pay attention to be sure when prying Be light and avoid prying off plastic hooks or visors.

3. After prying open the right side, turn the sun visor clockwise by about 90 degrees by hand. At this time, we will see a small white cover on the left side of the sun visor. Gently pry it off, and put the pryed small cover away for installation.

4. Next, we will see that there is a small screw inside, this screw is used to fix the sun visor, take out the t-20 spline, and use the t-20 spline to remove this screw, this step is still It's quite simple, everyone pay attention to the screws that have been dismantled and put away.

5. After the screws are disassembled, hold the left side of the sun visor with your left hand and the right side of the sun visor with your right hand, and then gently push down, mainly on the left side, so that the sun visor is separated from the big roof of the car, everyone As long as this step is slow and careful, you will be able to do it well.

6. After the sun visor is separated, unplug the harness plug inside, so that the sun visor can be disassembled. It should be noted that this harness plug is relatively small, so when you pull it out, you must be lighter to avoid Break the small wire harness.

7. The disassembled sun visor should be placed in Car Windshield Snow Covers Manufacturers a soft place to avoid soiling or scratching the surface of the sun visor. If you encounter such a problem, or interested friends, try it yourself, believe in yourself , then it must be done well.